Home / Products / Fully Automatic
Electrified-track operable wall
An automatic operable partition that opens, closes, and stacks under motorized drive. Operation is one-button from a wall screen or a handheld remote, with the option to connect to a building system.
The Fully Automatic series is an electrified-track operable wall: a motorized drive in the overhead track opens, closes, and stacks the leaves under a control system, rather than a person walking each panel into place. It is intended for hotels, banquet halls, meeting rooms, and exhibition halls where the wall is moved often and should be operated from a wall screen, a handheld remote, or, where specified, a building control system.
This series is not in the July 2024 printed Dayin catalog, which covers the manual Type 65, Type 85, Type 100, and Super-high walls. The figures on this page are typical system ranges for an automatic operable partition. They must be confirmed against the opening, panel weight, and control arrangement at quotation stage. We do not publish motor part numbers as if they were a Dayin catalog list.
How it is operated
The wall runs on an electrified overhead track. A motorized drive moves the leaves; a control system issues the open, close, and stack commands.
A DC brushless motor with a reduction gear provides the drive. It is a low-voltage drive, with an input in the region of 85–264 V stepping down to a 24 V class. Exact motor selection is confirmed with the quotation, not taken from a published Dayin parts list.
Operation is from a wall screen or a handheld remote. A link to a building control system can be specified. Delay and acceleration are adjustable. RF is the usual interface; Bluetooth or Wi-Fi can be added as optional interfaces.
If a panel is blocked, the following panels stop. The run resumes when the path is clear. This is a safety interlock for people and furniture in the opening, not a substitute for keeping the track clear during operation.
If power is lost, the system keeps each leaf’s position and can finish the movement when power returns. A key switch limits who can operate the wall.
System specifications
These are typical system ranges for a fully automatic operable partition. They are not figures from the July 2024 Dayin catalog, and they should not be read as laboratory test results for a named Dayin model. Custom sizes are available; every value must be confirmed against the opening at quotation stage.
| Item | Typical range | Note |
|---|---|---|
| Panel width | About 800–1,500 mm | Custom available |
| Maximum per panel | About 500 kg | Custom available |
| Number of panels | Up to about 110 | Custom available |
| Operating speed | About 0.10–0.20 m/s | Confirm for the opening |
| Track | High-strength 6061 aluminum, anodized | Load-bearing about 750 kg/m or more |
| Drive | DC brushless motor with reduction gear | Low-voltage drive; input around 85–264 V to 24 V class |
| Control interfaces | Wall screen, handheld remote | Optional building-system link; RF usual, Bluetooth or Wi-Fi optional |
Because this series is not in the printed Dayin catalog, we list system ranges rather than a model-by-model table. Faces can follow the same melamine, hard-wrap, or soft-wrap options used on the manual series, subject to confirmation for the automatic build. Acoustic performance, if required, is specified with the project and is not published as a catalog rating on this page.
Every series is offered in the three faces used in the catalog. The model suffix tells you which face you are looking at.
Custom artwork, moulded faces, and two-tone builds appear in the project photographs and can be discussed with the quotation.
Typical settings
The photographs below are Dayin project and catalog images of banquet, ballroom, and conference openings. They show the kind of room in which a fully automatic wall is specified. They are not photographs of a named automatic installation, and no project names have been added.
Typical applications: Hotels, Banquet halls, Meeting rooms, Exhibition halls.
Related series
Taller conference rooms, banquet rooms, and multi-function halls up to 6 m.
View series
Banquet halls, large conference rooms, and multi-function halls 5–8 m high.
View series
Hotels, banquet halls, and multi-function halls. The body text cites 9–17 m; the table cites 7–13 m.
View seriesProject inquiry
Include the clear height and width, the stacking side if you know it, how the wall should be controlled, and any acoustic rating in the specification. Fully Automatic is pre-selected below.